This press release features multimedia. View the full release here: http://www.businesswire.com/news/home/20171114006805/en/
Despite its small package, the TCR15AG series can drive a high current of 1.5A, suiting it for power supply applications in Wi-Fi® chipsets for smartphones and tablets, cameras and wireless modules. The new series can also control power supply in applications requiring a high current, including notebook PCs, digital camcorders, storage devices and set-top boxes.
TCR15AG series deliver the industry’s best-in-class[1] ripple rejection ratio and load transient response. They significantly reduce the ripple noise from a power management IC (PMIC) or a DC-DC converter that is often a limiting factor in the power supply for cameras and radio-frequency (RF) circuits. This helps to minimize output voltage fluctuations that occur in response to sharp changes in current during mode transitions in cameras and RF circuits.
Low voltage dropout is secured by use of an external bias voltage pin (VBIAS), which helps to improve system power efficiency and contributes to longer charge life for the batteries of mobile products.
The series offers two kinds of output voltage—adjustable output between 0.60V and 3.6V via external resistors, and fixed output voltages from 0.65 V to 3.6 V—enabling support for a wide range of power supply applications.
The TCR15AG series extensive protection features include overcurrent protection and thermal shutdown, positioning it as a high-efficiency LDO solution for applications requiring highly regulated voltage in the high-current region and low power consumption.
Applications
•Smartphones, tablets, notebook PC, digital video cameras, storage equipment, set-top boxes
Features
•High output current of 1.5 A in the industry’s smallest WCSP6F package
•The industry’s highest ripple rejection ratio and fastest load transient response; highly suited to camera and RF applications
•Low dropout voltage, a requirement for high-efficiency power supply applications
•Protection features include overcurrent protection, thermal shutdown, inrush current reduction and auto-discharge.
Main Specifications
(Ta=25°C)
Items TCR15AG series
Fixed Output Voltage TCR15AGADJ
Adjustable Output Voltage
Package Name WCSP6F
Dimension typ.(mm) 1.2×0.8, t:0.33 (max)
Operating Range Output current
IOUT(A) 1.5
Bias voltage
VBIAS VOUT <= 1.1 V,
IOUT = 1 mA 2.5 (min) , 5.5 (max)
VOUT > 1.1 V,
IOUT = 1 mA VOUT +1.4 (min) , 5.5 (max)
Output voltage
VOUT(V) 0.65 to 3.6 0.60 to 3.6
Input voltage
VIN(V)@IOUT=0 mA VOUT +VDO (min), VBIAS (max)
Electrical Characteristics Bias current
IB typ.(μA)@IOUT=0 mA[2] 25
Ripple rejection ratio
R.R.(VIN) typ.(dB)[3] 95
Drop-out voltage
VDO typ.(mV)@VBIAS=3.3 V, IOUT=1.5 A[4] 120
Load transient response
⊿VOUT typ.(mV) @IOUT=10 mA <--> 1.5 A -100, +115
Line-up
Product No. VOUT(V)(typ.) Product No. VOUT(V)(typ.)
TCR15AG065 0.65 TCR15AG21 2.1
TCR15AG07 0.7 TCR15AG22 2.2
TCR15AG075 0.75 TCR15AG23 2.3
TCR15AG08 0.8 TCR15AG24 2.4
TCR15AG085 0.85 TCR15AG25 2.5
TCR15AG09 0.9 TCR15AG26 2.6
TCR15AG095 0.95 TCR15AG27 2.7
TCR15AG10 1.0 TCR15AG275 2.75
TCR15AG105 1.05 TCR15AG28 2.8
TCR15AG11 1.1 TCR15AG285 2.85
TCR15AG115 1.15 TCR15AG29 2.9
TCR15AG12 1.2 TCR15AG295 2.95
TCR15AG125 1.25 TCR15AG30 3.0
TCR15AG13 1.3 TCR15AG305 3.05
TCR15AG135 1.35 TCR15AG31 3.1
TCR15AG14 1.4 TCR15AG32 3.2
TCR15AG15 1.5 TCR15AG325 3.25
TCR15AG16 1.6 TCR15AG33 3.3
TCR15AG17 1.7 TCR15AG335 3.35
TCR15AG175 1.75 TCR15AG34 3.4
TCR15AG18 1.8 TCR15AG35 3.5
TCR15AG185 1.85 TCR15AG36 3.6
TCR15AG19 1.9 TCR15AGADJ Adjustable
TCR15AG20 2.0
Notes:
[1]: As of November 15, 2017 for LDO regulator ICs with an output current of 1.5A. Toshiba Electronic Devices & Storage Corporation survey.
[2]: Not including a control terminal current (Icr) and a current flowing through an external resistor for a variable-output LDO regulator
[3]: VBIAS = 3.3V, VIN = VOUT + 1V, IOUT = 10mA, VOUT = 0.9V, f = 1kHz, VIN Ripple = 200 mVp-p, Ta = 25°C, COUT = 4.7μF
[4]: Measured at 0.9V output with the TCR15AGADJ variable-output LDO regulator. VDO = VIN1*1 - (VOUT1*2 – 100 mV)
*1: VIN1 is an input voltage when the output voltage drops from VOUT1 to 100 mV.
*2: VOUT1 is an output voltage when VN = VOUT + 0.5 V.
* Wi-Fi is a registered trademark of Wi-Fi Alliance.
Follow the link below for more on Toshiba Electronic Devices & Storage Corporation’s LDO Regulator line-up.
https://toshiba.semicon-storage.com/ap-en/product/linear/power-supply/ldo-regulator.html
Customer Inquiries:
Small Signal Device Sales & Marketing Department
Tel: +81-3-3457-3411
https://toshiba.semicon-storage.com/ap-en/contact.html
*Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.
About Toshiba Electronic Devices & Storage Corporation
Toshiba Electronic Devices & Storage Corporation combines the vigor of a new company with the wisdom of experience. Since being spun off from Toshiba Corporation in July 2017, we have taken our place among the leading general devices companies, and offer our customers and business partners outstanding solutions in discrete semiconductors, system LSIs and HDD.
Our 19,000 employees around the world share a determination to maximize the value of our products, and emphasize close collaboration with customers to promote co-creation of value and new markets. We look forward to building on annual sales now surpassing 700-billion yen (US$6 billion) and to contributing to a better future for people everywhere.
Find out more about us at https://toshiba.semicon-storage.com/ap-en/company.html
View source version on businesswire.com: http://www.businesswire.com/news/home/20171114006805/en/
Contacts
Media Inquiries:
Toshiba Electronic Devices & Storage Corporation
Chiaki Nagasawa, +81-3-3457-4963
Digital Marketing Department
semicon-NR-mailbox@ml.toshiba.co.jp
Source: Toshiba Electronic Devices & Storage Corporation
Reporter: PR Wire
Editor: PR Wire
Copyright © ANTARA 2017
