- Supports AEC-Q100 Grade2 Requirements -

TOKYO--(Antara/BUSINESS WIRE)-- Toshiba Corporation’s (TOKYO: 6502) Storage & Electronic Devices Solutions Company today announced the launch of JEDEC e∙MMCTM Version 5.1[1] compliant embedded NAND flash memory products supporting AEC-Q100 Grade2 [2] requirements. The line-up offers densities of 8GB, 16GB, 32GB and 64GB. Sample shipments start from today with mass production scheduled for the second quarter (April to June) of 2017.





This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20161220005388/en/





The new products integrate NAND chips fabricated with 15nm process technology with a controller to manage basic control functions for NAND applications in a single package. As a complement to Toshiba’s previous product group of e∙MMC, which deliver the operating temperature range of -40 to +85°C required by car infotainment applications, the new products support applications such as instrument clusters that require e∙MMC storage solutions to operate at higher temperatures up to +105°C.





In the automotive market, demand for NAND flash memory is continuing to grow alongside advances in car infotainment, ADAS [3] and autonomous driving systems. Toshiba is meeting this demand by reinforcing its line-up of high performance and high density memory products and will continue to take leadership in the market.





Toshiba is also developing automotive UFS [4] products that support AEC-Q100.





New Product Line-up

Part Number Capacity Temperature Range Package
THGBMHG6C1LBAB6
8GB
-40℃ to +105℃


11.5x13x0.8mm
THGBMHG7C2LBAB7
16GB
-40℃ to +105℃


11.5x13x1.0mm
THGBMHG8C4LBAB7
32GB
-40℃ to +105℃


11.5x13x1.0mm
THGBMHG9C8LBAB8 64GB -40℃ to +105℃

11.5x13x1.2mm



Key Features

1. Integrated NAND Flash Memory Management
The JEDEC e∙MMC Version 5.1 compliant interface handles essential functions, including writing block management, error correction and driver software. It simplifies system development, allowing manufacturers to minimize development costs and speed up time to market for new and upgraded products. Additionally, new features[5] standardized in JEDEC e∙MMC Version 5.1, such as BKOPS control, Cache Barrier, Cache Flushing Report, Large RPMB Write and Command Queuing, are applied to the new products to enhance usability.




2. Extended Temperature Range
Supports operating temperature range of -40°C to +105°C.
Toshiba also conducted additional reliability test to meet AEC-Q100 Grade2 specifications.





Key Specifications

Interface JEDEC e∙MMC V5.1 standard HS-MMC interface

Capacity
8GB, 16GB, 32GB, 64GB
Power Supply Voltage
2.7-3.6V (Memory core) 1.7V-1.95V, 2.7V-3.6V (Interface)

Bus Width
x1, x4, x8
Temperature Range
-40oC to +105oC
Package 153Ball FBGA 11.5mm x 13.0mm

Notes

[1] e•MMCTM is a product category for a class of embedded memory products built to the JEDEC e•MMC Standard specification and is a trademark of the JEDEC Solid State Technology Association.
[2]
Electrical component qualification requirements defined by the AEC (Automotive Electronics Council).
[3]
Advanced Driving Assistant System
[4]
Universal Flash Storage: Product category for a class of embedded memory products built to the JEDEC Standard specification.
[5]
“BKOPS control” is a function where the host allows the device to perform background operation when the device is idle. “Cache Barrier” is a function that controls when cache data is written to the memory chip. “Cache Flushing Report” is a function that informs the host if the device’s flushing policy is FIFO (First In First Out) or not. “Large RPMB write” is a function that increases the data size that can be written to the RPMB area to 8KB.




*The products are labeled based on their memory chip(s), not the amount of memory capacity available for data storage by the end user. Part of the capacity is reserved for device management. Please refer to the data sheet or your local Toshiba sales representative. (For purposes of measuring memory capacity in this context, 1GB = 1,073,741,824 bytes.)




Customer Inquiries:
Memory Marketing Division
Tel: +81-3-3457-3451
http://toshiba.semicon-storage.com/ap-en/contact.html




Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.




About Toshiba

Toshiba Corporation, a Fortune Global 500 company, channels world-class capabilities in advanced electronic and electrical product and systems into three focus business fields: Energy that sustains everyday life, that is cleaner and safer; Infrastructure that sustains quality of life; and Storage that sustains the advanced information society. Guided by the principles of The Basic Commitment of the Toshiba Group, “Committed to People, Committed to the Future”, Toshiba promotes global operations and is contributing to the realization of a world where generations to come can live better lives.




Founded in Tokyo in 1875, today’s Toshiba is at the heart of a global network of 550 consolidated companies employing 188,000 people worldwide, with annual sales surpassing 5.6 trillion yen (US$50 billion). (As of March 31, 2016.)
To find out more about Toshiba, visit www.toshiba.co.jp/index.htm








View source version on businesswire.com: http://www.businesswire.com/news/home/20161220005388/en/




Contacts

Media Inquiries:
Toshiba Corporation
Storage & Electronic Devices Solutions Company
Digital Marketing Department
Koji Takahata, +81-3-3457-4963
semicon-NR-mailbox@ml.toshiba.co.jp


Source: Toshiba Corporation Storage & Electronic Devices Solutions Company


Reporter: PR Wire
Editor: PR Wire
Copyright © ANTARA 2016